Anker

Anker SOLIX Solarbank 3 E2700 PRO + 4x BP2700 Expansion Battery

£1,991.99 incl. VAT
In stock · ships in 1-2 working days
1

  • Free delivery
  • 14-day returns
  • 2-year warranty
  • Secure payment

Description

This storage set includes:

  • 1x Anker SOLIX Solarbank 3 E2700 PRO
  • 4x Anker SOLIX BP2700 expansion battery

SOLIX Solarbank 3 E2700 PRO balcony battery storage system

The powerful SOLIX Solarbank 3 E2700 PRO storage system from Anker has a capacity of 2.7 kWh and a long-life LiFePO4 battery. This plug & play system installs in five minutes, while real-time data in the Anker app gives you full control over your energy supply. The inverter is already built into the unit, and you can connect up to four solar panels rated at a maximum of 600 W each.

The three-phase smart meter – an electricity meter for your PV system – has a built-in chip that measures and optimises your electricity consumption precisely in real time. Using 1-watt adjustment you can fine-tune the discharge, and the smart meter responds to your changes within just three seconds. That lets you use your energy at exactly the point when your PV system is at its most productive.

The unit reports stored energy along with voltage, current and power factor data. It also keeps that data for at least 60 days so you can review it later. Connection to the smart meter is via Wi-Fi, Bluetooth or an RS485 cable.

  • High storage capacity (2.7 kWh) for evening and overnight use
  • Expandable to 10.8 kWh with additional batteries
  • Simple plug-and-play installation with no electrician needed
  • Smart app control with real-time monitoring
  • Long-life LiFePO4 battery rated for more than 6000 charge cycles
  • IP65 rating allows use in a wide range of settings, including outdoors

Anker SOLIX BP2700 expansion battery

Supplied with the storage system are BP2700 expansion batteries with a capacity of 2700 Wh each. Thanks to IP65 certification and a service life of up to 6,000 charge cycles, you get a long-lasting, weatherproof solution for sustainable energy.

  • Provides reliable power during power cuts and emergencies
  • Expandable battery capacity with up to five expansion batteries to increase your energy supply
  • High capacity, rated at 2.7 kWh per battery
  • Long-life battery rated for up to 6,000 charge cycles
  • Protected against dust and water (IP65), ideal for all weather conditions
  • Withstands extreme temperatures from -20 to +55 °C
  • Mounting brackets included to install and secure the expansion batteries safely
Anker SOLIX Solarbank 3 E2700 PRO + 4x BP2700 Expansion Battery
£1,991.99 incl. VAT

Questions about this unit

Do I need to register this set?

Rules differ by country and network operator — check what applies where you are. In most markets a plug-in system is notified to the local grid operator, and the battery falls under the same notification as the solar it sits behind. The paperwork is included with the delivery.

Does the output rating breach the export limit?

No. Export limits apply to the power fed into your home wiring. In the manufacturer's app you set the export to whatever your market allows; the higher rated output is used for connected loads and for internal charging.

Can I add more batteries later?

On the modular units, yes. The extra pack stacks, connects with the supplied cable and is recognised in the app after a short firmware sync. No work on your home wiring is needed. The maximum configuration is listed in the technical data.

Can it stay outside in winter?

With IP65 and cell heating, yes: discharge down to −20 °C, charging from around 0 °C, with the heater covering the range below. Choose a rain-sheltered spot on a wall and leave clearance at the vents.

How long do the rated cycles last, and what does the warranty cover?

At roughly 250 to 300 full cycles a year, 6,000 cycles is more than 15 years of use down to 80 % remaining capacity. The manufacturer warranty is listed in the technical data; your statutory rights apply on top.

How is it installed, and do I need an electrician?

Panels plug in, the unit stands on a level surface or mounts with the supplied bracket, and it connects to a standard socket. The plug-in configuration does not require an electrician. For a fixed feed-in point or metering in the consumer unit, use a qualified electrician.